Sale!

Portable EV Charger NEMA 14-30/24 AMP

$299.99 $279.99

In stock

Empowering Electric Vehicle Adoption

24 Amp Portable EV Charger, 240 Volt with SAE J1772 and NEMA 14-30 Interfaces for maximum possible charging rate on a 30 Amp circuit.

Free Shipping in the continental US

SKU CGB-J2-016-24A Category Tag Product ID: 4630

Description

  • Super Fast – fastest possible charging on a 30 Amp circuit.
  • Zero cost installation – this NEMA 14-30 charger uses the traditional 240v dryer plug found in most homes.
  • Ease of use – Just plug it into your NEMA 14-30 Dryer plug and connect it to your EV.
  • See the charging state at a glance – the charger is equipped with 4 LED’s: Power, Charge, Fault 1, Fault 2.
  • Charge any standard EV – The charger is compatiable with all common Electic Vhicles (BEV’s and PHIV’s) available in North America.
  • Lightweight – The unit weighs only 7.7lbs (3.5 kg) making it very portable – use it at home or pop it in the trunk for a road-trip.
  • Convenient – The charger comes complete with a carry case to make the unit compact and simple to store.
  • Safety Certifications – cTUVus, CE and TUV
  • Warranty – a full one year warranty is included for peace of mind.

Synopsis

24 Amp Portable EV Charger, 240 Volt with SAE J1772 and NEMA 14-30 Interfaces for maximum possible charging rate. This portable, lightweight cable style charger can charge any electric vehicle available in North America. It also supports the standard Tesla J1772 adapter. It features LED’s that show the real-time status of EV charging, including any faults. It supports up to 24 Amps continuous charging to enable you to get the maximum possible sustained charge rate from the traditional 30 Amp Dryer Plugs found in garages across North America. The NEMA 14-30 interface is the most prevalent 240V socket found in American homes – and therefor no electrician installation visit is required . This 24Amp charging rate is the maximum allowed by the National Electric Code (NEC) for charging using a 30 Amp circuit. The charger can also be connected to NEMA 14-30 and NEMA 14-50 sockets using commonly available adapters. This charger is compatible with all common EV’s sold in North America including Nissan Leaf, Chey Bolt and Chevy Volt and all Tesla model using their standard adapter.

Images

Features

  • The Splitvolt 24 Amp portable charger provides the fastest possible charging on a 30 Amp circuit.
  • The Splitvolt 24 Amp portable charger provides the fastest possible charging on a 30 Amp circuit.
  • The splitvolt 24 amp portable charger utilises your existing home wiring and power panel breaker protection without requiring any changes by an electrician.
  • Saves you thousands of dollars by utilizing your existing dryer plug without the time, cost or risk of electrical modifications to your home.
  • The 24 Amp charger is the perfect companion to your 30 Amp dryer circuit because 24 Amps is the maximum continuous load that this circuit can handle.
  • The 24 Amp charger operates within the NEC safety guidelines by delivering the maximum 24 Amp continuous charging rate for a standard 30 Amp circuit.
  • 24 Amps is enough power to allow even large EV’s with high battery capacity to charge from empty to full overnight.
  • The 24 Amp portable charger is very robust and well sealed from dust and moisture ingress. It has been certified as IP55.
  • The 24 Amp portable charger includes four key safety features – Over Current Protection, Over-Voltage Protection, Over heating Protection and Current Leakage Protection.
  • The 24 Amp portable charger can display a wide range of status and fault conditions using its 4 LED’s. This keeps the operator informed of charging status at all times.

Specifications

Wall socket connection NEMA 14-30 Male
Electric Vehicle Connection SAE J1772
Overall Length 16.4 ft (5 Meters)
Packaged Weight

9.0 lbs (4.1 kg)

Maximum Charging current 24 Amps
Voltage 240 Volts
Package dimensions 17.7 x 4.7 x 13.4 inches (45x12x34 cm)
Dust and Water protection IP55
Warranty 1 year
Safety Certifications

cTUVus, CE and TUV

LED’s Three LED’s – Power, Fault One, Fault Two.

User Guide

Download official and complete Splitvolt User Guides here.

The information below is the text-only quick reference from the user guide. For tables, images, and additional information, view the PDF file using the link above.

Splitvolt L2 Portable Fast EV Charger

QuickStart User Guide

Models: CGB J1-016, CGB J2-016, CGB J3-016

The Splitvolt Level 2 Portable EV Charger can charge any electric vehicle (EV) that is equipped with a standard SAE J1772 interface. This includes the vast majority of EVs sold in North America. The charger can also charge any Tesla EV using the adapter that Tesla supplies with their vehicle.

  • The CGB J1-016 and CGB J2-016 models (with 24-amp capacity) provide the fastest possible safe charging rate from common household 30-amp dryer circuits.
  • The CGB J3-016 model (with 40-amp capacity) provides the fastest possible safe charging rate from a standard 50-amp circuit.

IMPORTANT: Please read this manual and the rear sticker on charger before use for important safety information.

Contact information

Splitvolt, Inc. info@splitvolt.com
3250 Victor Street, Unit B www.splitvolt.com
Santa Clara, CA 95054

Splitvolt L2 Portable Fast EV Charger

If you’re using a standard dryer plug, choose the CGB J1 or J2 model that corresponds to your plug type (NEMA 10-30 or 14-30). If your electrician has installed 50-amp service, choose the CBG J3 model (NEMA 14-50).

Features and capabilities

  • Super fast: Fastest possible safe charging on 30- or 50-amp circuits
  • Easy to use: just plug it into your NEMA 10-30, 14-30, or 14-50 wall socket or your Splitvolt Splitter Switch and connect it to your EV
  • See the charging state at a glance via 4 LEDs (see table below)
  • Charge any standard EV: compatible with all common electric vehicles (BEVs and PHIVs) available in North America
  • Lightweight: highly portable at only 6.4lb (2.9 kg), so you can use it at home or pop it in the trunk for a road trip
  • Convenient: comes with a carry case, compact and simple to store
  • Safety certifications: cTUVus, CE, TUV
  • Warranty: full one-year warranty included for peace of mind

Warnings

  • This device contains no user-serviceable parts—do not open
  • Do not submerge this device in water
  • Do not use this product if the cable or any other part is damaged
  • Intended for Electric Vehicle charging use only
  • For use with standard U.S. household 30-amp or 50-amp circuits
  • Rated for NEC maximum safe continuous charging of 24 or 40 amps

How to start charging

  1. Take out the charger and fully insert the 240-volt plug into the wall socket outlet
  2. Remove the cover and a) for non-Tesla vehicles, plug the J1772 vehicle connector into your vehicle inlet; or b) for Tesla vehicles attach the standard J1772 adapter and insert into vehicle inlet
  3. The device will start charging automatically while the READY/CHARGE, POWER indicators are all green

How to stop charging

  1. Press the button and disconnect the J1772 vehicle connector from the vehicle inlet
  2. Close protective cap of vehicle inlet
  3. If necessary, disconnect the plug from the socket outlet

LED indications

The charger is equipped with an LED panel that indicates the various states of the product, including fault and charging status.

Troubleshooting

If you are having trouble, note the LEDs on your unit and consult the table in the full User Guide to determine the status of your system. Then follow the steps to resolve the problem. Check our website (www.splitvolt.com) and contact us if you are still unable to resolve.

Need more help?

Please visit www.splitvolt.com, email info@splitvolt.com, or call (650) 209-0091 and leave a message with your contact information, product model number and the issue you are experiencing.

Disclaimers

This product should not be submerged in water and must be treated in a manner consistent with its IP55 enclosure rating.

The CGB J1-016 and CGB J2-016 models of this product are designed to operate at a maximum continuous charging rate of 24 amps on a standard household 30-amp circuit, according to the National Electrical Code (NEC).  Exceeding this rate can trip your household breaker, or lead to damage or risk of fire.

The CGB J3-016 model is designed to operate at a maximum continuous charging rate of 40 amps on a standard household 50-amp circuit, according to the National Electrical Code (NEC).  Exceeding this rate can trip your household breaker, or lead to damage or risk of fire.

These products are for use with standard home wiring that is built and maintained to the latest National Electrical Code (NEC) safety standards.  If you suspect that your home wiring does not meet code, or is worn-out or damaged in some fashion, contact an electrician for a safety inspection prior to using this product.

1-year limited warranty

Splitvolt, Inc warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for a period of one year from the date of purchase. This warranty does not cover damages as a result of an accident; resulting from the use or misuse of parts not manufactured or sold by Splitvolt, Inc; or resulting from modification of the Splitvolt Charger.

These warranties extend only to the original purchaser of the product and are not transferable. To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. These warranties apply only to natural purchasers of the Splitvolt Charger for personal, family, or household use, not to commercial, institutional, or industrial purchasers. These warranties are valid only in the United States. In no event shall Splitvolt, Inc. be liable for any direct, indirect, incidental, special, consequential, or multiple damages arising out of the use of the Splitvolt Charger devices.

Video

Splitvolt 2021. All Rights Reserved

Santa Clara |  California | USA

Phone: +1 (650) 209-0091